Six ways to see what's happening inside your process
Every service below runs on a live system — no shutdown, no vessel entry, no lost production time.
Gamma Scan Pro
Gamma Scan Pro evaluates the internal condition of trayed and packed columns, strippers, absorbers and reactors while they stay fully operational. A gamma source and detector pair moves along the outside of the vessel, mapping density changes that reveal what's happening inside.
- Identifies tray damage, collapse and displacement
- Detects flooding, foaming and weeping conditions
- Reveals packed-bed maldistribution before it costs yield
- No insulation removal or process interruption required
Pipe Scan
Pipe Scan uses the same density-mapping principle as Gamma Scan Pro, scaled for above-ground pipework. It's a fast, straightforward way to find sludge, deposits and blockages that are slowing or restricting flow — without cutting into the line.
- Pinpoints the exact location of blockages and build-up
- Measures deposit thickness when material density is known
- Works through insulation — no need to strip the line
- Rapid mobilisation for urgent flow-restriction troubleshooting
Neutron Scan
Neutron Scan applies neutron backscatter technology to measure interface levels inside separators, desalters and storage tanks — resolving gas, hydrocarbon, water, emulsion and solid phases that standard instrumentation often misses.
- Accurate multi-phase level and interface measurement
- Confirms instrument readings during start-up or upset conditions
- Detects moisture under insulation and hidden emulsion layers
- Fully external — no tank entry or process disruption
FMD Pro
FMD Pro — Flooded Member Detection — is our underwater diagnostic service for offshore platforms. It identifies water ingress inside structural members, a defect that can quietly compromise platform integrity long before it's visible above the waterline.
- Detects through-wall defects allowing water ingress
- Surveys jacket legs and platform structural members
- Performed underwater without removing marine growth
- Supports structural integrity assessments for ageing platforms
Mini ROV
Our Mini ROV service gives operators a fast, low-cost way to get eyes underwater. Launched from a small crew or support vessel — no dedicated ROV support vessel or dive team required — it delivers high-definition visual inspection of hulls, jetties, pipelines and subsea structures.
- Rapid deployment from small crew boats or platform access points
- Live HD video feed plus recorded footage for inspection reporting
- Reaches tight or hazardous access points safely, without divers in the water
- A cost-effective alternative to full work-class ROV mobilisation for routine visual surveys
Cathodic Protection Survey
This service covers the full range of cathodic protection (CP) inspection needed to keep offshore and onshore assets protected from corrosion — from underwater ROV-based surveys to 3D CP modelling and consultancy.
- Structure CP and PFG surveys — ROV-deployed probes, cutting survey time by up to 60%
- Dropcell CP surveys for fast, low-cost general structure potential readings
- Onshore CP inspection, troubleshooting, maintenance and EPCC of SACP/ICCP systems
- 3D CP modelling to predict system life and design anode retrofit solutions
From first call to final report
1. Consultation
Tell us what you're troubleshooting. We recommend the diagnostic method that fits your equipment and timeline.
2. On-Site Scanning
Our engineers mobilise to your facility and run the scan externally, live, with minimal footprint on site.
3. Analysis & Report
Data is analysed and delivered as a clear, actionable report your engineers can use immediately.
Describe the problem — we'll recommend the scan
Our engineers can help you choose between Gamma Scan Pro, Pipe Scan, Neutron Scan and FMD Pro based on your equipment and symptoms.
Contact Our Team